|
13800吨ccs化学品船 (待售) 我也要发布!! |
| 友情提示：本站所有内容无本站无关，均为网友自行发布，也不代表本站观点。 |
船舶出售->中国新造船->其它液货运输船->化学品船
|
| |
|
|
|
| 描述 |
|
| |
13800DWT
PRODUCT OIL / CHEMICAL TANKER
13800DWT成品油/化学品船
概 况：The vessel shall be suitable for carrying product oil (F.P≤600) and chemical
according to IMO Type II and III. The specific gravity of cargo oil shall be 1.52 t/ m3 in
all cargo tanks and slop tanks.
本船载重量约为13800t，用于运载闪点小于60℃的汽油和柴油、重油及Ⅱ类/Ⅲ类化学品。最大油品比重
1.52t/m3。
船 型：The vessel to be a raked stem with a bulbous bow, a transom stern with open stern
bulb, one (1) continuous upper deck with forecastle and poop. The cargo area is constructed
with double skin, double bottom and one center longitudinal bulkhead. grade B ice
strengthening.
航 区： 无限航区 船 级： CCS船级社
联系我时，请说是在82船舶网上看到的，谢谢！
|
| |
| 基本规范 | |
| 尺寸(米): | 138*21*10 |
| 吃水(米): | 8.1 |
| 建造地: | 浙江 |
| 建造时间: |
2009 |
|
| 报价: | 12888万人民币 |
| 交易方式: | 港口 |
| 发布日期: | 2021/7/27 1:50:55 |
| 查看次数: |
3931 |
|
| |
| 备注 | |
| |
主要尺度Main dimension 总长 Loa 137.96m Length overall
型宽 B 20.80m Breath moulded 型深 D 10.80m Depth moulded
设计吃水 d 8.10m Design draught moulded
航 速： Speed
螺旋桨设计时考虑了主机功率储备15%，本船在设计吃水（d=8.10m），船壳清洁无污底情况下，处于风
力小于蒲氏风级三级的平静深水水域条件下主机达到额定转速时的服务速度约12.6节。
Propeller will be designed at 15% of storage power of main engines. The sea trial speed at
design draft, 8.10 m, to be 12.6 knots in condition of clean hull without pollution, deep
and currentless water and wind and sea not more than Beufort 3. Email:[email protected]
载重量Deadweight 本船最大载重量定为13800吨。 Max. deadweight of the vessel is to be 13800
tons. Final deadweight should be confirmed after finished inclining test.
Gross deadweight GT=8437 Net deadweight NT=4169
联系我时，请说是在82船舶网上看到的，谢谢！ |
| |
| 编号: Y0370 (待售) |
|
